Geometry.Net - Basic_C: Control Engineer


Home - Basic_C - Control Engineer

e99.com Bookstore

Images

Newsgroups

81-100 of 193 Back | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next 20

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Control Engineer: more books (100)

Labor Productivity Control: New Approaches for Industrial Engineers and Managers by John C. Martin, 1990-11-30
Modal Analysis Modeling Diagnostics and Control Analytical and Experimental: Analytical and Experimental : Presented at the 1991 Asme Design Technical ... Design Engineering Division), V. 38.) by Fla.) Conference on Mechanical Vibration and Noise (13th : 1991 : Miami, 1991-06
Matlab Toolboxes and Applications for Control (I E E Control Engineering Series) by A. J. Chipperfield, 1993-09
Structural Acoustics (Nca 12) by Ga.) American Society of Mechanical Engineers. Winter Meeting (1991 : Atlanta, R. F. Keltie, 1992-06
Symposium on Mechatronics 1993: Presented at the 1993 Asme Winter Annual Meeting, New Orleans, Louisiana, November 28-December 3, 1993 (Dsc (Series), V. 50.) by La.) Symposium on Mechatronics (1993 New Orleans, Tsu-Chin Tsao, et all 1993-10
Hydroacoustic Facilities Instrumentation and Experimental Techniques/Nca10/No H00712: Presented at the Winter Annual Meeting of the American Society of ... December 1-6, 1991 (Nca (Series), V. 10.) by T. M. Farabee, Ga.) American Society of Mechanical Engineers. Winter Meeting (1991 : Atlanta, 1991-06
Intelligent Processing of Materials: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Dallas, Texas, November 25-30, 1990 (MD (Series), V. 21.) by H. P. Wang, Ga.) American Society of Mechanical Engineers. Winter Meeting (1991 : Atlanta, 1990-06
Combustion Instabilities Dreiven by Thermo Chemical Acoustic Sources/Nca Vol. 4/Htd Vol. 128/H00531: Presented at the Winter Annual Meeting of the American ... 10-15, 1989 (Htd (Series), Vol. 128.) by Alan S. Hersh, 1989-06
Flexible Assembly Systems 1994: Proceedings of the 4th Asme Flexible Assembly Conference, Minneapolis, Mn. (De (Series) (American Society of Mechanical Engineers. Design Engineering Division), V. 73.) by Minn.) Asme Flexible Assembly Conference 1994 (Minneapolis, 1994-09
Adaptive Structures: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, San Francisco, California, December 10-15, 1989 (Ad (Series), V. 15.) by Ben K. Wada, Ga.) American Society of Mechanical Engineers. Winter Meeting (1991 : Atlanta, 1989-06
Automated Modeling: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Anaheim, California, November 8-13, 1992 (Dsc Series : Volume 41) by Ga.) American Society of Mechanical Engineers. Winter Meeting (1991 : Atlanta, Brian Falkenhainer, et all 1992-02
Applications of Modeling and Identification to Improve Machine Performance/Dsc29/No H00689: Presented at the Winter Annual Meeting of the American Society ... December 1-6, 1991 (Dsc (Series), V. 29.) by Louis Jackson Everett, Ga.) American Society of Mechanical Engineers. Winter Meeting (1991 : Atlanta, 1991-08
Intelligent Structures: Materials and Vibrations (De (Series) (American Society of Mechanical Engineers. Design Engineering Division), V. 58.) by N. M.) Conference on Mechanical Vibration and Noise (14th : 1993 : Albuquerque, 1991-02
Engineer and Construction Control by W. L. Elsby, 1981-06

lists with details

Bernard Lloyd Hwang - Motion Control Engineer For Hire
Modify C++ source code for motion control test software for automatic testing and data Quality Assurance Test Engineer June 2003 September 2003
http://www.ocf.berkeley.edu/~beno/resume.html

Extractions: Bernard Lloyd Hwang 6616 Mount Wellington Drive San José California 408.483.3776, beno@ocf.berkeley.edu Objective: To Obtain a Mechanical Engineering Position Education: M.S. in Mechanical Engineering San José State University San José California (May, 2004) - GPA: 3.52/4.00 (Current Coursework: Automatic Controls, Mechatronics , Precision Machine Design) B.S. in Mechanical Engineering University of California Berkeley Berkeley California (May, 1998) Certification: Engineer-in-Training, State of California (June, 2002) Job Experience Engineering Co-op Applied Materials, Inc., Santa Clara CA Tune and characterize servo motors in position, velocity, and torque control modes for XP and Producer VXP vacuum robots. Use and modify MATLAB code to process time and frequency response test data. Modify C++ source code for motion control test software for automatic testing and data collection. Design experimental apparatus for testing of wafer-handling robots. Document mechanical design of commercial product. Write functional requirement for automated testing and calibration application. Quality Assurance Test Engineer Metris USA Santa Clara CA Tested Paraform 3-D modeling software package for usability and stability.
Career Opportunities In Control Systems Engineering
The impact of control systems engineering is seen everywhere around us. When all are considered, the job opportunities for control engineers are
http://www.eas.asu.edu/~aar/classes/eee480S99/articles/careertracks.html

Extractions: The following article addresses career opportunities in control systems engineering. It has appeared in The impact of control systems engineering is seen everywhere around us. Control systems are found in cars, house appliances, medical instrumentation, petrochemical refineries, commercial and military jets, robotic manufacturing systems, precision missile systems, etc. At the core of every control system are basic feedback principles. Feedback is arguably the key to designing any "intelligent system." After all, don't all of us rely on feedback to learn? Feedback principles are universally applicable. They are necessary, for example, in the design of electronic circuits, non-volatile stock portfolios, and modern medicines. Feedback control is everywhere! The above (very simplified) description captures the essence of feedback control systems. Similar control systems and feedback principles are found in many areas: satellite attitude control systems, launch vehicle guidance and control systems, modeling of neural cortex functions and other biological processes, semiconductor manufacturing furnace temperature control systems, environmental systems (e.g. ozone depletion), autonomous exploration vehicle guidance and control systems, etc. What are related fields?
Savi Technology: Document Control Engineer
Document control engineer. Requirements. Creates and modified detailed drawings using CAD hardware and software from sketches , layouts or notes provided by
http://www.savi.com/company/jobs/DocumentControlEngineer.shtml

Extractions: ****JavaScript based drop down DHTML menu generated by Visual QuickMenu Pro. (OpenCube Inc. - http://www.opencube.com)**** //Document Level Menu Settings cddcodebase = "http://www.savi.com/scripts/" cddcodebase99007 = "http://www.savi.com/scripts/" cddactivate_onclick = false cddshowhide_delay = 100 cddurl_target = "_self" cddurl_features = "http://www.savi.com/scripts/" cdddisplay_urls_in_status_bar = true cdddefault_cursor = "hand" COMPANY Overview Company History Fact Sheet ... Site Map Search Creates and modified detailed drawings using CAD hardware and software from sketches , layouts or notes provided by engineering. Modification of to facilitate manufacturing operation or quality of product. Checks drawing plots versus the project input for correctness and conformance to standards. Works with engineers regarding model accuracy, design drafting standards and ECN/ECR documentation. May work with systems management including file maintenance, backup and storage.
Senior Instrumentation And Control Engineer
Senior Instrumentation and control engineer, Vancouver. The successful candidate will be a Senior Instrumentation control engineer with a minimum of five
http://www.delcan.com/prod/index.php?id=283
SCADA/Process Control Engineer - Moorpark - California
Engineering job listed for SCADA/Process control engineer in Moorpark, California. GK Associates, Inc. is seeking a Experienced, not licensed (no PE)
http://www.engineer.net/jobs/engineeringjobs.php?cn=GK Associates, Inc.&jobid=78
Corrosion And Fluoride
Corrosion control engineer Explains Fluoride Action. reprinted from National Fluoridation News, JulySeptember, 1975. Willis T. Bachellor, Inc. sent a
http://www.sonic.net/kryptox/environ/lead/electric.htm

Extractions: reprinted from National Fluoridation News , July-September, 1975 Willis T. Bachellor, Inc. sent a sample of a broken rusted pipe and a container of sludge from a Seattle apartment house to the Food, Chemical and Research Laboratories, Inc. for analyses on March 27, 1972. The sample of pipe showed 1,044 ppm and the sludge 475 ppm of fluoride. Mrs. Elizabeth M. Boyd, an interested and concerned Seattle resident recently mailed a copy of the fluoride findings to Dr. Willard E. Edwards, a consulting corrosion control engineer of Honolulu asking for a reason for the high fluoride content of the pipe and sludge. Dr. Edwards replied: Fluoride acts differently in the water of various cities, since the water chemical content is seldom the same, unless the water supply is from the same source. In general, fluoride has a great affinity for iron oxide. It often softens previously hard pipe scale or iron oxide in steel pipes and tanks. This softened scale is often loosened and carried away from its previous location, thus allowing new iron oxide to form and corrode and weaken pipes and tanks under pressure. Fluoride increases the electrical conductivity of water. In general, the higher the electrical conductivity of water, the higher its ability to allow corrosion to occur to metals it contacts. Where steel pipes or fittings are connected to brass, bronze or copper fittings, pipes or tanks, an electrogenic (corrosive) action takes place in the presence of fluoridated water, between the steel and the other metals. The steel becomes anodic while the brass, bronze or copper is cathodic, and the steel corrodes. This is called bi-metallic corrosion, and it occurs whenever two different metals are electrically (mechanically) connected in the presence of an electrolyte like fluoridated water.
Skills For Hire: Find Skills For Hire
Quality control engineer B.Sc. Food Science Engineering with strong background in quality assurance and control, food processing inspection and
http://www.skillsforhire.org/occupation/15/

Extractions: Millwright / Industrial Mechanic (9) Darnahal, Maryam B.Sc. in the field of Applied Physics plus 3 years professional experience in Quality Engineering in Automotive parts Applied Statistical Process Control (SPC), Advanced Product Quality Planning (APQP) and Potential Failure Mode and Effects Analysis (PFMEA) Prepared parts submission document requirements for part approval and submission levels Coordinated internal manufacturing process between engineering and manufacturing Keen familiarity with Microsoft Word, Excel and Access
Clean Room Construction Ltd Cleanrooms UK
Contamination control engineers that manufacture clean and contained facilities for the pharmaceuticals, medical devices, medical disposable microelectronics, aerospace, optics, food and healthcare industries. From UK.
http://www.crc-ltd.co.uk

Extractions: of optimum facilities is paramount. Clean Room Construction (London) Ltd is a UK leading specialist contractor in this field that has developed an enviable reputation for its cleanroom design services. Since 2000 the company has operated from new 5000sq ft premises in Strood, Kent and has developed and strengthened, taking on new technologies and design solutions to meet the expanding needs of the contamination control market. Blue chip organisations as diverse as the Medical Research Council, H J Heinz and the Ministry of Defence have relied on CRC (London) Ltd cleanroom design services provide tailored solutions to the need for clean, aseptic and containment facilities for sectors such as pharmaceuticals, life sciences, defence, microelectronics, food, healthcare and bio-technology. Well-structured project management throughout the UK plus detailed engineering and procurement programmes are the key to success.
All Control Engineer Jobs In Washington | Indeed.com
Search for All control engineer jobs in Washington.
http://www.indeed.com/jobs?q= Control Engineer&l=Washington, DC&rb=1
Student Profiles
Tony is now Principal control engineer with Lucas EPAS BSc Hons Control and Computer Engineering Technical University of Istanbul Turkey (1991)
http://www.csc.umist.ac.uk/profiles/default.htm

Extractions: PhD "A Methodology for the Simulation of Large-Scale Dynamical Systems Using Concurrent Computing Facilities" - Control Systems Centre UMIST (1989) Kenny Corscadden Kenny is now employed as Research Manager with Messmer Buchel BEng Electronic and Electrical Engineering - Bolton Institute of Higher Education(1993)
Design Division Job Posting Archives
area of Guidance, Navigation and control engineering. US citizenship is a requirement. The positions are located in Tucson AZ. Below are three job
http://design.stanford.edu/archive/0437.html
CM / Version Control Engineer
An online community and resource center for configuration management.
http://www.cmcrossroads.com/ubbthreads/showflat.php?Cat=&Number=33942&page=0&vie
Multec Canada Ltd - Complete Search Selection And Referral Of Manufacturing, Eng
Position control engineer JSF Salary To A Max of $70 per hour Proven Systems Engineering knowledge. Experience in control systems development and
http://www.multec.ca/details.php3?custid=6610&detailsemail=TORONTO
Multec Canada Ltd - Complete Search Selection And Referral Of Manufacturing, Eng
Emploi control engineer JSF Salaire Jusqu à concurrence de $70 per hour Proven Systems Engineering knowledge. Experience in control systems
http://www.multec.ca/french/details.php3?custid=6610
About IFAC
This is an IFAC award to a distinguished control engineer, presented at each The control engineering Practice Editorial Board awards prizes for the best
http://www.ifac-control.org/about/awards.htm

Extractions: Read the Nominator Instructions File Fill in the IFAC Fellow Nomination Form Send this form to the IFAC Secretariat by e-mail Double-check the provided contact addresses of the References (The IFAC Secretariat will contact them) Any question, as well as the result of your Nomination, should be handled through the IFAC Secretariat The Giorgio Quazza Medal This is an IFAC award to a distinguished control engineer, presented at each IFAC World Congress as a memorial to the late Giorgio Quazza , a leading Italian electrical and control engineer who served IFAC in many capacities in a most distinguished manner. The medal is awarded by the IFAC Council on the recommendation of a selection committee. A monetary prize is presented to the recipient together with the medal. Medal winners have been:
Job Description
. Daily maintenance of database for Bill of Materials, design change documents and drawings.Specification control engineer. Position
http://es.dir.alabama.gov/local/Honda/jqe02.html

Extractions: DIR Home Contact DIR About DIR DIR Telephone Directory ... Management and Technical Employment Opportunities Specification Control Engineer Daily maintenance of database for Bill of Materials, design change documents and drawings. Communicate design change information to manufacturing and support departments in order to coordinate implementation timing. Two years of engineering experience related to bill of material or design change. A 2 or 4 year engineering or business degree or equivalent experience. Must have knowledge of PC applications, mainframe database management, CATIA drawing systems and product order/delivery systems. Good communications skills, problem solving skills, organizational skills and project management skills needed. Honda is an Equal Opportunity Employer
The UK's Leading Pollution Control Engineering Company With Over 20 Years Experi
Pollution control engineers with product guide, contacts and location.
http://www.fercell.demon.co.uk/
AACE International - Resume - Project Control Manager, Lead Cost
Project Control Manager, Lead Cost Engineer, Program Manager, Sr. Project control engineer, Principal Cost Engineer, Lead Planning Engineer
http://www.aacei.org/listings/employment/resumes/2005-05-20_15-13-33.html
From Haber-Bosch To Creutzfeld-Jakob: A Control Engineer's Perspective
The control engineer studies systems in transition, and this preoccupation and familiarity with dynamic change makes the skills and outlook of the control
http://www-control.eng.cam.ac.uk/Homepage/abstracts/thomas.html

Extractions: The engineer's training and experience develop a viewpoint and ways of thinking that are applicable far beyond the confines of what is commonly thought of as engineering. The engineer inhabits a world of new, unsolved problems that he or she is called upon to solve as a matter of routine. The control engineer studies systems in transition, and this preoccupation and familiarity with dynamic change makes the skills and outlook of the control engineer highly relevant to many of the important problems facing society today. Back to Control Seminars Page
Occupation Information
Engineer (Chemical), Metallurgical Engineer, Microbiological Engineer, Process control engineer, Project Engineer, Water Treatment Engineer )
http://www.myfuture.edu.au/services/default.asp?FunctionID=5050&ASCO=212917B

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

81-100 of 193 Back | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next 20