Geometry.Net - Technology: Computational Engineering


Home - Technology - Computational Engineering

e99.com Bookstore

Images

Newsgroups

21-40 of 198 Back | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next 20

Computational Engineering: more books (100)

Computational Error and Complexity in Science and Engineering, Volume 201 (Mathematics in Science and Engineering) by Vangipuram Lakshmikantham, Syamal Kumar Sen, 2005-05-20
Computational Methods for Plasticity: Theory and Applications by EA de Souza Neto, Prof. D Periæ, et all 2009-01-06
Combustion Science and Engineering (Computational Mechanics and Applied Analysis) by Kalyan Annamalai, Ishwar K. Puri, 2006-12-19
Computational Fluid Dynamics for Sport Simulation (Lecture Notes in Computational Science and Engineering)
Discretization Methods and Iterative Solvers Based on Domain Decomposition (Lecture Notes in Computational Science and Engineering) by Barbara I. Wohlmuth, 2001-03-26
Numerical Modeling in Materials Science and Engineering (Springer Series in Computational Mathematics) by Michel Rappaz, Michel Bellet, et all 2010-05-14
Classical and Computational Solid Mechanics (Advanced Series in Engineering Science) by Y. C. Fung, Pin Tong, 2001-10
Computational Electromagnetics for RF and Microwave Engineering by David B. Davidson, 2010-11-30
Boundary Element Methods in Engineering and Sciences (Computational and Experimental Methods in Structures) by M. H. Aliabadi, 2010-10-30
Computational Electromagnetics (Texts in Applied Mathematics) by Anders Bondeson, Thomas Rylander, et all 2010-11-02
Nuclear Computational Science: A Century in Review by Yousry Azmy, Enrico Sartori, 2010-05-14
Error Estimation and Adaptive Discretization Methods in Computational Fluid Dynamics (Lecture Notes in Computational Science and Engineering)
Computational Methods in Transport: Verification and Validation (Lecture Notes in Computational Science and Engineering)
Analytical, Numerical, and Computational Methods for Science and Engineering by Gene H. Hostetter, Mohammed S. Santina, et all 1991-01

lists with details

Uces.ameslab.gov/
ERC computational engineering Academic Programscomputational engineering (CmE) encompasses the design, development, and applicationof systems for the solution of physical problems in engineering and
http://uces.ameslab.gov/
SimCenter At Mississippi State University
Data reduction, analysis, and visual presentation of computed flow fields.computational engineering education and training.
http://www.erc.msstate.edu/simcenter/

Extractions: The SimCenter's mission is to serve Mississippi State University, government, and industry through research and development of advanced computational modeling, simulation, and design of physical systems to solve real world problems. As a result of the SimCenter's application-driven team-oriented approach to basic and applied research on complex industrially-relevant engineering problems, they have: The SimCenter substantive areas of expertise include: High-resolution dynamic simulation of complex flow fields for real-world physical systems. Computational simulation software systems.
Computational Engineering Group's Home Page
CLRC Computational Science Engineering Department computational engineering.With an unrivalled combination of leading-edge fluid flow expertise and
http://www.cse.clrc.ac.uk/ceg/index.shtml

Extractions: Enter text and press return Home About us Contact us Support and services ... Training courses With an unrivalled combination of leading-edge fluid flow expertise and the latest high-performance computing solutions, the Computational Engineering Group helps customers solve complex problems and compress the development cycle. The group has been collaborating on groundbreaking projects with academia and industry for many years. Whether it is an academic group using a large-scale parallel machine or a commercial company with a complex fluid-flow problem, the group's expertise and technology can have a profound effect. The group is one of the world's leading players in the modelling and design of microfluidic devices. An emerging issue in this exciting new field is the fact that at such small scales the fluid flow does not behave the same as that experienced in the macroscopic world. Dr. David Emerson
International Journal For Multiscale Computational Engineering - Journals - Bege
The aim of the journal is to advance the research and practice in diverse areasof Multiscale computational engineering. The journal will publish original
http://www.begellhouse.com/journals/61fd1b191cf7e96f.html

Extractions: if(location.href != getCookie('back')) setCookie('back', location.href, null, '/'); ITEMS modern scholarly publishers in the finest tradition Journals Login Register Home Books Journals References A-Z Index Author Index For Our Authors Shopping Cart Contact Electronic Data Center Search Chief-in-Editor Jacob Fish, Professor,
Computational Science And Engineering Education Program
Computational Science and Engineering (CS E) is a new approach to education in This study has been part of the ENGN4518 computational engineering and
http://anusf.anu.edu.au/hpclab/cseep.html

Extractions: The Computational Science and Engineering Education Program at the Australian National University has been underway since 1996. The Program is a joint initiative between the Faculty of Engineering and Information Technology and the ANU Supercomputer Facility Click here for information about the objectives and pedagogical aims of the CSEEP project. A "flagship" case study for the program is the analysis of the stainless steel support structure for the "Puppy" sculpture which was carried out by Sydney firm DW Knox and Partners. This study has been part of the ENGN4518 Computational Engineering and Computer Graphics courses. Jeff Koons: Puppy 1995 Museum of Contemporary Art, Sydney, Australia, Henry Gardner (Program Director) Computer Graphics CSEEP staff supervise three 4th year student projects and three PhD projects in cooperation with other ANU staff. The HPC Laboratory has been established as the central site for the CSEE program on campus. The laboratory is used both as a graphics laboratory for desktop-scale modelling, and as a front end to the high performance supercomputers at ANUSF to perform "compute intensive" calculations while visualising the data in the lab.
ENGN4518 Computational Engineering
computational engineering Scientific Computing An Introductory Survey byMichael T. Heath, McGraw Hill 1997. This is an excellent text,
http://anusf.anu.edu.au/hpclab/engn4518_2000/

Extractions: This unit is incompatible with COMP3067, COMP3320 and MATH3103. Rounding Errors; Linear Algebra Interpolation; Integration; Statistical Graphics Differentiation; ODE's PDE's; Finite Elements Optimisation Revision This laboratory will introduce the Interactive Data Language (IDL) and will give examples of some of the tricks that rounding errors play in floating point computations!
Ruhr-Universität Bochum - Frameversion - Index
Translate this page Master of Science Course - computational engineering at the Ruhr-Universtiy Bochum.
http://www.ruhr-uni-bochum.de/comp-eng/
Computational Engineering And Design Centre (home) (CEDC)
University of Southampton The computational engineering and Design Centre activities in the area of computational modelling of engineering systems.
http://www.soton.ac.uk/~cedc/

Extractions: The CEDC home page Introduction This centre is based in the Faculty of Engineering and Applied Science at Southampton University. Its aim is to provide a focus for the Faculty's expanding activities in the area of computational modelling of engineering systems. Its work is based on the use of powerful parallel and clustered computational facilities drawing on the existing experience and hardware of the University in this area. The centre is located in a dedicated facility which houses up to 15 researchers working on projects drawn from across all disciplines in the faculty. It is directed by Prof. A.J. Keane. Aims and facilities The primary aim of the CEDC is to develop and exploit models of engineering systems using powerful computational facilities, i.e., based on models that could not be dealt with by standard desk-top type workstations. Moreover, the staff involved expect these projects to lead to continued industrial funding and aim to achieve this by supporting projects that are both relevant to industry and state-of-the-art. Those working in the centre intend that it becomes a major player in the academic world of engineering computation. The CEDC is equipped with a suite of dedicated Silicon Graphics workstations, on a one per person basis, together with a high-powered graphics machine for pre- and post-processing of computational studies. It also houses an eight noded Silicon Graphics Power Challenge machine while its largest computations are carried out on the Faculty's SGI Origin 2000 with 14 processors.
Evolutionary Optimization
The computational engineering and Design Centre (CEDC) The BAeRR UniversityTechnology Partnership for Design Departmental Web Pages
http://www.soton.ac.uk/~ajk/opt/welcome.html

Extractions: Evolutionary Optimization The evolutionary optimization team is based in the Computational Engineering and Design Centre (CEDC) of Southampton University. It consists of a small number of graduate students and post-doctoral workers led by Prof. A.J. Keane . We are applying modern optimization methods to a number of problem areas. We have interests in: Genetic Algorithms Simulated Annealing Evolutionary Programming Evolution Strategies Dynamic Hill Climbing Traditional Hill Climbing Methods (such as Hooke and Jeeves searches)
Diana.ae.utexas.edu/
Archives of Computational Methods in Engineeringcomputational engineering is the leading theme of this publication. Specifically,it covers modelling, solution techniques and applications of computational
http://diana.ae.utexas.edu/
LIN - Laboratory Of Computational Engineering
The Laboratory of computational engineering (LIN) is a research and teachinglaboratory. The LIN is involved in a wide range of basic as well as applied
http://lin.epfl.ch/

Extractions: How to get to the LIN The Laboratory of Computational Engineering (LIN) is a research and teaching laboratory within the Institute of Energy Sciences (ISE) of the School of Engineering (STI) at the Swiss Federal Institute of Technology - Lausanne (EPFL) . The LIN is involved in a wide range of basic as well as applied research topics in fluid mechanics , from a computational and theoretical point of view. Teaching as well as fundamental and applied research are carried out in the areas of numerical and theoretical fluid dynamics. The activities are focussed on the physical understanding, modeling and manipulation of complex (unsteady, turbulent, 3-D, reacting) flows of compressible or incompressible (non-)Newtonian fluids by numerical simulation and by analytical modeling. a person a place epfl.ch with Google
Computational Engineering Research Centre
The computational engineering Research Centre (CERC) is built on At the sametime, Multiphysics computational engineering (also known as Computer Aided
http://www.usq.edu.au/engineering/cerc/

Extractions: Email: cerc@usq.edu.au The mission is to provide world class research in computational engineering, to act as an intellectual powerhouse and a catalyst for the development of a smart, globally competitive engineering sector in South-east Queensland and Australia. The Faculty currently boasts a fine record of achievement in the field of Computational Engineering, although staff members may work in different areas of application. By drawing staff together through the common theme of fundamental computational mechanics research, with a common aim of providing value added engineering solutions, the Centre aims to promote research activity and enhance international reputation through collaborative links, shared expertise and joint funding potential.
Computational Engineering
Top / Science / Technology / computational engineering CAMES ComputerAssistedMechanics and Engineering Sciences Journal Source of information in the
http://www.reference.com/Dir/Science/Technology/Computational_Engineering/

Extractions: CAD on the Web Database of CAD/CAM/CAE resources on the Internet. Army High Performance Computing Research Center Conducts computational science research in fluid dynamics, structural mechanics, enviromental science and materials science. Los Alamos National Laboratory Scientific Computing Group at Los Alamos. Computational Mechanics Publishing Ltd Publications in the fields of Acoustics, Advanced Computing, Architecture and Structures, Biomedicine Boundary Elements, Earthquake Engineering, Environmental Engineering, Fluid Mechanics, Fracture Mechanics, Heat Transfer, Marine and Offshore Engineering and Transport Engineering. Polish Academy of Sciences - Computational Mechanics No description CAMES: Computer-Assisted Mechanics and Engineering Sciences Journal Source of information in the field of computational mechanics and related areas of applied science and engineering. Mathematical and Statistical Software Available at NCSA No description Pro/Engineer® and Pro/Mechanica® Produced at the Department of Mechanical Engineering at Northwestern University, this tutorial contains five parts, headed: background, getting started, creating a part - frame, creating a part continued - shaft, assembly, and drawings. Other Pro/Engineer resources are also indicated.
SINTEF Applied Mathematics, Computational Engineering
http://www.sima.sintef.no/
Computational Engineering Tackles Large-scale P
computational engineering Tackles Largescale Projects to Improve Quality of Life ENGINEERING MATERIALS. Computational models of the microstructures of
http://www.sdsc.edu/GatherScatter/GSsummer97/engineering.html

Extractions: ENGINEERING [Contents] [Next Article] It is probably no surprise to any engineer that the Mir space station, having exceeded its design lifetime, began in 1997 to experience systemic failures, aggravated by an unexpected encounter with a docking module. The wonder, in fact, was that it had performed so well for so long. "Engineers would prefer that people wonder at the durability of their creations and be surprised by their ability to avoid the modes of catastrophic failure that are all too common today," says J. Tinsley Oden, director of the Texas Institute for Computational and Applied Mathematics (TICAM), holder of an endowed chair of engineering at the University of Texas at Austin, and the leader of the engineering thrust area of NPACI. "Our aim in NPACI will be to address major technological problems that affect the prosperity, security, and overall quality of life of the people in our society," Oden says. According to Oden, a properly coordinated, multidisciplinary effort can take advantage of advances in high performance computing to solve significant engineering problems and develop, at lower cost, goods with dramatically improved durability, new techniques for noninvasive surgery, advances in microelectronics, enhanced oil recovery and pollution control, and safer vehicles. In line with these aims, Oden says, the engineering area will focus initially on four projects: design and characterization of engineering materials, large-scale simulation of electromagnetic and acoustic fields, oil reservoir simulation and subsurface pollution remediation, and crash worthiness of vehicles.
TechScience
Proceedings of the 2000 International Conference on computational engineering Sciences Edited by Satya N.Atluri, Frederick W. Brust (Read More)
http://www.techscience.com/books/aces00_hc.html
Hannover University - International Studies - Computational Engineering
International Master Programmes. computational engineering Studies incomputational engineering Faculty of Civil Engineering and Geodetic Science
http://www.uni-hannover.de/en/internat/int_studium/master/e_ma_comp_ing.htm

Extractions: Computers - as it happens also engineering products - have established themselves as important tools for engineers in recent years and have replaced the pocket calculators and set squares. The complex, interdisciplinary challenges which engineers will face in the 21st century cannot be solved without computer simulations. The University of Hannover offers a Master Programme in Computational Engineering since Winter Semester 2001/02. This programme combines at a high score level the foundations of computational methods in engineering. Courses are given in the fields: Applied Mathematics Advanced Mechanics Applied Informatics Engineering Applications Engineering applications can be chosen from courses in civil engineering, mechanical engineering and electrical engineering. Further Information Successful candidates should have at least a BSc in an engineering discipline, but the studies are open for applied mathematicians or physicians too. Depending on the former studies an individual start-up programme will be designed for those applicants. Study Guide - Computational Engineering Faculty-own Information
Hannover University - Studies - Study Guide Computational Engineering
Study Guide computational engineering GIF (278 Byte), Important Addressesfor the Study of computational engineering
http://www.uni-hannover.de/en/studium/stfuhrer/e_comp_ing.htm

Extractions: Introduction Degrees and Qualifications Practical Training General Information on the Course of Studies Course Length Course Structure Recognition of Study Elements and Achievements Basic Study Stage Main Study Stage Extension Study Stage Study and Examination Regulations Application Papers and Number of Admissions for Germans, Foreign Nationals with German Education and Citizens of EU Member States Application Papers and Number of Admissions for Non-EU Nationals Additional Information on Applications and the Beginning of the Course Important Addresses for the Study of Computational Engineering Faculty of Civil Engineering and Surveying Information in German only Last updated:
TFH Berlin: Studiengang Computational Engineering
Engineering in computational engineering (Berechnungsingenieur)
http://www.tfh-berlin.de/studium/fbii/ce.htm
Masterstudium Computational Engineering
Translate this page Das Masterstudium computational engineering trägt dieser anspruchsvollen Aufgabebesonders Rechnung. (Rettungshubschrauber wurde von P+Z Engineering GmbH,
http://www.tfh-berlin.de/~kalus/Comp_Eng/Welcome.html

21-40 of 198 Back | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next 20